· Getting Started · About 8 min

Shadowrocket English Interface Guide: What Home, Config, Proxy, Direct, Data, and Settings Mean

Learn what Shadowrocket’s tabs and common interface labels mean and where to find them. Keep labels in English for easy reference while you follow along.

At a Glance

This guide uses Shadowrocket’s English interface on iPhone and iPad. It’s for anyone getting started with Shadowrocket or looking up English menu labels. First, distinguish the bottom tabs from the routing options under Home; then use a single visit to check connection status, routing, and traffic readings. Entry points on other platforms may differ.

Home: Connection, Servers, and Test Tools

Home is where you check and start a connection. Not Connected at the top means the app hasn’t established a VPN connection; it doesn’t mean the server is unavailable. Having an entry in the SERVER list, selecting a server, and connecting to the VPN are three separate states. The first time you connect, iOS may ask to add a VPN configuration. Allow it in the system prompt to continue.

  1. Check the Server

    Under Home → SERVER, check which entry is selected. If the list is empty, tap + in the top-right corner of Home to add your existing server details. To import a subscription, tap + → Type → Subscribe, enter your subscription URL, and save. Subscription URLs may contain access tokens, so don’t include the full URL in screenshots or troubleshooting notes.

  2. Note the Routing Mode

    Open Home → Global Routing and note the selected option. To test rules, choose Config, then check which configuration file is active under the Config tab at the bottom. If you’re troubleshooting an issue, leave settings unchanged at first; preserving the current state makes it easier to pinpoint the cause.

  3. Connect

    Return to Home, switch on the connection, and wait for the status to change to Connected. If it switches back to Not Connected, first check whether iOS allowed the VPN configuration, then review your server details. Don’t assume a connection failure is caused by routing rules.

  4. Test Separately

    Run Connectivity Test from Home and check the result, then open the URL you’re testing in a browser. A test result only confirms that the probe returned a reading; it doesn’t verify that the target page is accessible. If the page won’t load, check routing, DNS resolution, and the destination service separately.

Global Routing:Proxy、Direct、Config、Scene

Global Routing controls how Shadowrocket handles intercepted traffic. Proxy and Direct are options here, not bottom tabs. Config is both an option here and the name of a bottom tab. The first tells you how traffic is routed; the second takes you to the configuration files.

Config

Recommended

Routes traffic according to the rules in the active configuration. Requests that don’t match an earlier rule are handled by fallback settings such as FINAL; don’t assume they’ll always go direct.

Use when: You have a routing configuration and want traffic handled by its rules

Proxy

Routes all traffic intercepted by the app through the proxy, rather than deciding where each request goes based on the Config file. This option doesn’t change the server address, port, or authentication details.

Use when: You want to compare access results temporarily using the same server

Direct

Sends traffic intercepted by the app directly, without going through a proxy server. Selecting Direct does not turn off the VPN switch on Home.

Use when: You want to check whether a destination is reachable directly on the same network

Scene

Selects a routing mode based on the configured scene. Before using it, check the scene conditions and its associated mode. Don’t assume the route based only on whether you’re connected to Wi-Fi.

Use when: You’ve configured scenes and want routing to change with the network environment

Config and Settings: Where to Find Rules and Connection Options

Choose the right section for what you want to change

Config: Configuration Files
  • Tap Config in the bottom bar. Check which file is active before reviewing its rules. A file appearing in the list doesn’t mean it’s currently in use.
  • When reviewing domain rules, check both the matching condition and the action. If multiple rules can match the same destination, check their order too.
Settings: App Preferences
  • To review automatic connection conditions, go to Settings → On Demand. This controls when a connection starts, not how a particular domain is routed.
  • If the connection comes back after you switch it off, first note the On Demand settings and the network in use when it reconnects. Then check whether the behavior can be reproduced; there’s no need to change the rules file first.

To change how traffic is routed, check the Config file and Global Routing. To change automatic connection conditions, check Settings → On Demand.

For example, the two lines below are examples to read in the configuration file’s rules section, not addresses to enter under SERVER. DOMAIN-SUFFIX matches a specified domain and its subdomains; FINAL handles requests that didn’t match an earlier rule. The uppercase DIRECT in a rule is that rule’s action. Direct under Global Routing is a global routing option; it doesn’t mean only the example domain goes direct.

DOMAIN-SUFFIX,example.com,PROXY
FINAL,DIRECT

With Config selected as the routing mode, a request to www.example.com matches the first line if no earlier rule matches it. Requests that don’t match that suffix or any other rule fall through to the second line. If the result differs from what you expected, first check the hostname actually being accessed: the page may redirect, and images or scripts may come from other domains. A single page load doesn’t necessarily correspond to just one rule.

Data: Understanding Upload, Download, and Total Traffic

The Data tab in the bottom bar shows traffic statistics; it isn’t for choosing a server. Upload is the amount of data sent, and Download is the amount received. Cumulative readings in KB, MB, and similar units aren’t real-time speeds. When viewing traffic by server, make sure the entry is the server you want to monitor. If the interface offers per-app readings, use those entries instead; don’t add figures from different views together.

FAQ: Similar Labels and Connection Status

Why isn’t traffic following the rules when I open the Config tab?

Opening the bottom tab only takes you to the configuration files. First check that the file you want is active, then go to Home → Global Routing and make sure Config is selected. If both are correct, test with a known hostname and check the first matching rule and its fallback action.

Why does Home still show Connected when Direct is selected?

Connected means the VPN connection is established; Direct means intercepted traffic is being sent directly. To end the current connection, use the switch on Home. If it connects again automatically, check the trigger conditions under Settings → On Demand.

Connectivity Test shows a result, but the page won’t load. What should I do?

Note the selected server, Global Routing option, and URL that failed. Keep the network, server, and URL the same; temporarily compare access with Proxy and Config, then restore the original option. If it fails only with Config, check the domains involved and the rules’ actions. If both modes fail, the test result alone doesn’t prove the destination is reachable.

Why didn’t the rules in Config change after I updated a subscription?

If you updated a server subscription whose Type is Subscribe, first check the server details under Home → SERVER. That doesn’t replace the rules file currently in use under the Config tab. When troubleshooting, note the server list and active configuration file separately so you don’t mistake them for a single update.

Download Shadowrocket